|
| TM 32-5895-206-10
Table 3-2. Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
RECORDER/REPRODUCER AND RELATED ITEMS
1. BATTERIES WEAK OR DISCHARGED, OR NO POWER.
Step 1. Press the mode selector switch in, press down the latch, and turn to REPRODUCE position.
Step 2. Press BAT TEST button. Read battery condition on the LEVEL meter. Reading should be in the green
area.
If the battery condition reads below green, replace the batteries as instructed in paragraph 2-6b. Check the fresh
batteries.
3-17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |