Chapter 5. ASSEMBLAGE CAPABILITIES

TM 11-5895-458-14

CHAPTER 5

ASSEMBLAGE CAPABILITIES

5-1. General

5-5. Radio Terminal SetsAN/MRC-126 and AN/MRC-

127

Compatible components of the Low Capacity Tactical

Radio Relay system can be arranged in varied

As illustrated in figure 5-6,the equipment sets in the

configurations to meet specific application requirements.

AN/MRC-126 or the AN/MRC-127can be employed for

Block diagrams of typical 6-or12-channel pcm multiplex

an on secure 6-or12-channel radio terminal, or a secure

systems are shown in figure 5-1. Each assemblage in

radio terminal (fig. 5-8) in a low capacity tactical radio

the

system

contains

matched

quantities

relay system. Both equipment sets of the AN/MRC-

components(table 6-1) to permit optimum versatility and

127can be used as a 12-channel radio repeater (fig.5-4).

meet requirementsforanypracticable6/12channel pcm

system.

The capabilities of each assemblage

5-6. RadioTerminalSetAN/TRC-145

areindicatedinparagraphs5-2through5-6.

Radio Terminal Set AN/TRC-145 constitutes two

5-2. erminalSet,TelephoneAN/TCC-65

equipment sets which can be arranged to provide secure

or nonsecure cable or radio terminal facilities, cable or

The four equipment sets of the AN/TCC-65 can be

radio repeater facilities, and cable to radio conversion

employed in a combination of capabilities as indicated

(fig.5-2through5-8).

below:

a Radio Terminal. (1) Each equipment set can be

a. Each equipment set of the AN/TCC-65 can

arranged to provide a 6-or12-channel nonsecure pcm

beutilizedtoprovide12-channelcabletrans-

radio terminal facility as shown in figure 5-6. (2) Each

missionasshownin figure 5-2.

equipment set can be arranged to provide 6-or12-

b. As shown in figure 5-3,any two of the four

channel secure pcm radio terminal facility as shown in

equipment sets can be configured to meet the

figure5-7.

requirementsofa12-channel cable repeater facility in a

b. Cable Terminal.

low capacity radio relay system.

(1) Each equipment set can be arranged to

provide a 6-or12-channel nonsecure pcm cable terminal

facility as shown in figure 5-2. (2) Each equipment set

5-3.RepeaterSet,RadioAN/TRC-113 As illustrated in

can be arranged to provide a 6-or12-channel secure

figure 5-3,both equipment sets of theAN/TRC-113 can

pcm cable terminal facility as shown in figure5-8.

be employed to meet 12-channel cable repeater

c. Repeaters.

requirements. They can be utilized as a 12-channel

(1) BothequipmentsetsoftheAN/TRC-145 can

radio repeater, shown in (figure 5-4. Any one of the

be employed to meet requirements for a 6-or 12-channel

equipment sets (fig.5-5) can be employed in a12-channel

pcm cable repeater as shown in figure 5-3. (2) Both

pcm cable to radio conversion. Although primarily a

equipment sets can be arranged to provide a 6-or12-

radio or cable repeater, the AN/TRC-113can be used

channel pcm radio repeater facility as shown in figure 5-

with other equipment, such as Terminal, Telephone

AN/TCC-65 for radio terminal applications.

d. Cable to Radio. As illustrated in figure 5-5, each

equipment set can be arranged to provide12-channel

5-4.RadioTerminalSetAN/MRC-115(V) Each of the two

pcm cable to radio conversion with order wire facility.

equipment sets in the AN/MRC-115(V) can be used as a

6-or 12-channel radio terminal with order wire

facilities(fig.5-6). Both sets can be employed as a 6-

or12-channel radio repeater with order wire facilities.

5-1