|
| 2-15. Preparation for Movement
To prepare the Radio for storage or shipment, refer to Figures 2-2 and 2-7 and perform the following:
a. Set PWR switch (15) to OFF.
CAUTION
Do not twist body of antenna. To do so may result in damage to Radio.
c. Turn ring of handset connector (1) CCW and remove handset. Slight inward pressure will be necessary to
remove handset.
d. Close hinged cover over control panel.
e. Open spring loaded latches securing power supply, then separate power supply from R/T unit
f.
Repack as necessary.
2-39/(2-40 blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |