Selecting Frequency of Operation

(7) Press and hold READ push-button (6) while ensuring the selected frequency is displayed on the

frequency display (1).

(8) Position the function selector switch (3) to the next desired position and repeat steps 4 thru 7.

c. Selecting Frequency of Operation. The Radio Set transmit and receive frequencies are determined by the

function selector switch. If channel selector switch is in MAN, the operating frequency is that which is

selected on the frequency selector switches. If function selector switch is in T2/R1, the transmit frequency

will be that which is stored in channel 2 and the receive frequency will be that which is stored in position 1. If

function selector switch is in any one of the positions 1 thru 6, the transmit and receive frequency will be that

which is stored in the selected position. To select operating channel, refer to Figure 2-5 and perform the

following steps:

(1) Position PWR switch (5) to up (ON) position and verify PWR indicator is on.

(2) Position SCAN switch (4) to OFF position.

(3) Position channel selector switch (3) to desired channel.

2-23