Preparation For Use

2-6. Preparation For Use (cont)

(1) Plug each antenna into its respective connector.

(2) Secure each antenna by tightening the retainer ring until snug.

CAUTION

Do not twist body of antenna. To do so may cause damage to either or both of

the connectors.

e. Handset. To connect handset to the R/T unit, perform the following steps.

(1) Align connector keys, then gently seat connector by pushing toward unit.

(2) While pressing connector ring toward the panel, rotate ring clockwise approximately a quarter turn until it

snaps in place.

2-7- Installation Options

The Radio Set is designed to be portable. One method of installation is to secure it to an accessory backpack carrier

with tray, using heavy duty belts, as shown in Figure 2-3. Provisions are also included for securing the Radio Set to an

accessory shock-mounted platform for vehicular or aircraft installation as shown in Figure 2-4.

2-17