|
| |
TM 11-5821-333-12
3-8. BRINGING ANOTHER STATION INTO THE NET.
If your display reads “CUE, ” someone who is not a member of your net is trying to reach you. If you wish to an-
swer, do as follows. (If possible, have an alternate NCS or other designated station answer the CUE call. If this is
not possible, have the alternate NCS control the net while you are out of the net to respond to the call).
a.
Tell the present net members to stand by (have alternate NCS control net while you are out of com-
munication).
b.
If you are using COMSEC equipment, set it to plain text mode.
c.
Set your radio PRESET switch to CUE.
d.
Establish voice communications with the CUE caller.
e.
If you wish to bring the radio into your net, use the Cue and ERF procedure (paragraph 2-27).
Section Ill. OTHER NCS PROCEDURES
Subject
Para
Page
Clearing a Single FH Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9
3-7
NCS Jamming and Anti–jamming Considerations . . . . . . . . . . . . . . . . . . . . . .3-10
3-8
NCS Net Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
3-8
3-9. CLEARING A SINGLE FH SET.
NOTE
YOU can’t clear the channel to which your PRESET switch is set.
ACTION
Set radio set switches:
FUNCTION
LD
MODE
FH or
PRESET
any position except CUE or
the preset you are clearing
a. To clear a hopset:
(1) Press CLR.
(2) Press number (1-6) of preset to be
cleared.
b. To clear a lockout set:
(1) Press CLR followed by LOUT (L).
(2) Press number (1-8) of left digit of lock-
out set number.
(3) Set PRESET switch to different position
and return.
RESPONSE
(1)
(2)
Display reads:
Display changes as shown. A beep is
heard, and display blinks. (NOTE: Num-
ber shown is example only, )
(1) Display changes as follows:
(2) Display changes as shown. A beep is
heard, and display blinks. (NOTE: Num-
ber shown is example only. )
(3) Display reads:
3-7
|
