|
| |
TM 11-5821-333-12
CONNECTIONS FOR RETRANSMIT FUNCTION
Two radio sets are used as a retransmit station. RT C is tuned to F1 and RT D is tuned to F2. When RT C receives a
message, it keys RT D and provides the audio or data signal to RT D. RT D then transmits the message on F2.
Frequencies F1 and F2 can be either single channel frequencies or frequency hopping hopsets. If both are single
channel frequencies, then they should be at least 10 MHz apart. If both are hopsets, they should be different
hopsets or the same hopset with different net IDs.
NOTE
When your radio has a good HUB or battery box installed,
setting the FCTN switch to OFF causes no loss of memory.
1-20
1-24. RETRANSMIT OPERATION
|
