Appendix C. COMPONENTS OF END ITEM LIST

TM 11-5820-919-12

APPENDIX C

COMPONENTS OF END ITEM LIST

Section I. INTRODUCTION

C- 1. Scope

This appendix lists integral components of and basic issue items for the AN/PRC-104(A) to help you inventory items

required for safe and efficient operation.

C-2. General

This Components of End Item List is divided into the following sections:

a. Section II. Integral Components of the End Item. These items, when assembled, comprise the AN/PRC-104(A)

and must accompany it whenever it is transferred or turned in. The illustrations will help you identify these items.

b. Section III. Basic Issue Items. These are the minimum essential items required to place the AN/PRC-104(A) in

operation, to operate it, and to perform emergency repairs. Although shipped separately packed they must accompany the

AN/PRC-104(A) during operation and whenever it is transferred between accountable officers. The illustrations will assist

you with hard-to-identify items. This manual is your authority to requisition replacement BllI, based on TOE/MTOE

authorization of the end item.

C-3. Explanation of Columns

a. Illustration. This column is divided as follows:

(1) Figure number. Indicates the figure number of the illustration on which the item is shown.

(2) Item number. The number used to identify item called out in the illustration.

b. National Stock Number.

Indicates the National stock number assigned to the item and will be used for

requisitioning.

c. Part Number. Indicates the primary number used by the manufacturer, which controls the design and

characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to

identify an item or range of items. Following the part number, the Federal Supply Code for Manufacturers (FSCM) is

shown in parentheses.

d. Description. Indicates the Federal item name and, if required, a minimum description to identify the item.

e. Location. The physical location of each item listed is given in this column. The lists are designed to inventory all

items in one area of the major item before moving on to an adjacent area.

f. Usable on Code. Not applicable.

C-1