|
| |
TM 11-5820-914-40P
NOTE
Complete repair: Maintenance capacity, capability, and authority to perform all cor-
rective maintenance tasks of the “Repair” function in a use/user environment in order
to restore serviceability to a failed item.
(1) Source Code, The source code tells you how to get an item needed for maintenance, repair, or over-
haul of an end item/equipment. Explanations of source codes follows:
Explanation
Stocked items;
use the applicable NSN to request/requisition
items with these source codes. They are authorized to the cate-
gory indicated by the source code entered in the third position of
the SMR code.
NOTE
Items coded PC are subject to deterioration.
Items with these codes are not to be requested/requisitioned individu-
ally. They are part of a kit which is authorized to the maintenance
category indicated in the third position of the SMR code. The com-
plete kit must be requisitioned and applied.
Items with these codes are not to be requested/requisitioned individu-
ally. They must be made from bulk material which is identified by
the part number in the description and usable on code (UOC) col-
umn and listed in the Bulk Material group of the repair parts list.
If the item is authorized to you by the third position code of the
SMR code, but the source code indicates it is made at a higher
category, order the item from the higher category of maintenance.
Items with these codes are not to be requested/requisitioned individu-
ally. The parts that make up the assembled item must be requisi-
tioned or fabricated and assembled at the category of maintenance
indicated by the source code. If the disposition code of the SMR
code authorizes you to replace the item, but the source code indi-
cates the item is assembled at a higher category, order the item
from the higher category of maintenance.
X A –
X B –
X C –
X D –
Do not requisition an “XA” coded item. Order its next higher assembly,
If an “ XB” item is not available from salvage, order it using the CAGEC and part number given.
Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufactur-
ers part number.
Item is not stocked. Order an “XD” coded item through normal supply channels using the CAGEC
and part number given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of
supply for items with the above source codes, except for those source coded “XA” or
those aircraft support items restricted by requirements of AR 750-1.
2
|
