|
| |
TM 11-5820-890-30-5
15-36. GENERAL
Section V. PREPARATION FOR STORAGE OR SHIPMENT
INFORMATION.
a.
Pack the battery tray and any removed modules in approved shipping containers.
b.
All modules must be shipped enclosed in material that provides protection from static electricity. See
the following paragraph.
15-37. PACKING STATIC SENSITIVE MODULES.
The following steps should be followed when packing a static sensitive module for storage or shipment.
CAUTION
To avoid damaging static sensitive modules, use an antistatic pad on the work surface and wear
a grounded wrist strap when handling the module.
ITEM
ACTION
REMARKS
a. Module (1)
Place inside antistatic bag (2) or inside
antistatic wrapping material (3). See
figure 15-8.
b. Antistatic package (4)
Seal with adhesive tape. Attach
“sensitive electronic devices” unit
pack label (5).
c. Antistatic package (4)
Place inside approved shipping container (6).
Attach “sensitive electronic devices”
intermediate pack label (7).
15-42
|
