|
| |
TM 11-5820-890-30-5
15-33. REPLACEMENT OF BATTERY TRAY CASE. Continued
ITEM
ACTION
REMARKS
INSTALLATION Continued
af.
ag.
ah.
ai.
aj.
Identification plate (9)
Obtain replacement identification plate.
Peel backing from plate. Place plate on
chassis. Apply downward pressure on
plate to form a seal between it and
chassis. See figure 15-4.
Battery box gasket (10)
Obtain replacement battery box gasket.
Peel backing from gasket. Place gasket
on chassis. Apply downward pressure
on gasket to form a seal between it and
chassis. See figure 15-3.
Battery tray gasket (3)
Place retained battery tray gasket on
chassis. See figure 15-4.
Mounting plate
Install retained mounting plate assembly
assembly (2)
on battery tray subassembly (1).
Seal screw (7)
Obtain replacement seal screw. Install
and hand tighten seal screw, securing
it to chassis. Use torque screwdriver
and flat tip adapter. Torque screw to
20 in-lb.
15-34. REPLACEMENT OF BATTERY BOX GASKET.
Refer to paragraph 15-34
for installation of battery
box gasket.
Refer to paragraph 15-21
for installation of battery
tray gasket.
Refer to paragraph 15-20
for installation of mounting
plate assembly.
ITEM
ACTION
REMARKS
REMOVAL
a. Battery tray assembly
Set on work surface with right side
toward you. See figure 15-3.
b. Battery box gasket (10)
Remove and discard defective battery
box gasket.
INSTALLATION
c. Battery box gasket (10)
Obtain replacement battery box gasket.
Remove backing material from self
adhesive on gasket. Place gasket on
chassis. Apply downward pressure on
gasket to form a seal between it and
chassis. See figure 15-3.
15-39
|
