|
| |
TM 11-5820-890-30-5
12-8. COMSEC MOUNT REPAIR PROCEDURE.
Tools:
Tool Kit, Electronic Equipment, TK-105/G
ITEM
ACTION
REMARKS
DISASSEMBLY
a. Two screws and
washers (1)
b. Electrical filter
assembly (2)
c. Clamp plate (3)
d. Rim clenching
clamp (5)
ASSEMBLY
e.
f.
g.
h.
Rim clenching
clamp (5)
Clamp plate (3)
Electrical filter
assembly (2)
Two screws and
washers (1)
Loosen and remove two screws and
See figure 12-2
two washers.
identification.
Pull assembly free from COMSEC
mount.
Fully loosen and remove two
thumbscrews (4).
Fully loosen and remove
thumbscrew (6).
Install and tighten
thumbscrew (6).
Install and tighten two
thumbscrews (4).
Place in position in COMSEC
mount.
Install and tighten two screws and
two washers.
for parts
12-3
|
