|
| |
TM 11-5820-890-30-5
4-75. REPLACEMENT OF POWER SUPPLY COVER GASKET.
Tools:
Flat tip screwdriver
Spanner wrench
Cross tip screwdriver
Spanner adapter
Torque screwdriver
Soldering kit
Expendable Supplies:
Sealing compound,
Silicone compound
References:
Paragraph 4-74 for
1-1/16-inch socket
grade H
Cotton swabs
Solder
replacement of power supply heatsink
Adjustable wrench
Socket wrench
Hex socket
Alcohol
ITEM
ACTION
REMARKS
REMOVAL Continued
a. Power supply
b. Power supply
gasket (1)
INSTALLATION
c. Power supply
gasket (1)
d. Power supply
cover (3)
Remove and retain cable W3 major
components to gain access to gasket
power supply cover (3)
cover
Remove gasket and clean the gasket
groove in power supply cover (2), in-
spect and replace gasket as required.
cover
Install gasket in power supply cover (2).
cover (3)
Install retained cable assembly W3 and
all associated hardware on power supply
cover.
Refer to paragraph 4-74
for repair instructions
See figure 4-22.
See figure 4-23.
See figure 4-23.
removed in step
See figure 4-22.
removed in step
This was
b.
This was
a.
4-199
|
