|
| |
TM 11-5820-890-30-5
4-73. REPLACEMENT OF REMOTE CONTROL TRANSFORMER CCA. Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
INSTALLATION
h. Wires
i.
Remote control
transformer CCA
Using soldering kit, solder tagged wires to
terminals on replacement remote control
transformer CCA (27). Remove wire tags.
(27)
Using cross tip screwdriver, install
retained screw (28), Iockwasher, and
flat washer securing center of remote
control transformer CCA (27) to power
supply cover. Using cross tip screwdriver,
install two retained screws (29) and lock-
washers securing ends of remote control
transformer CCA (27) to power supply
cover (3).
j.
Heatsink assembly (11)
Align heatsink assembly (11) to power
supply cover (17).
k. Screw (9) and
Using cross tip screwdriver, install retained
Before and after soldering,
clean wires and terminals
with alcohol and cotton
swabs.
These were removed in
step f.
These were removed in
flat washer
screw (9) and flat washer securing heatsink step c.
assembly to audio amplifier chassis (3).
l.
Screw (10)
Using flat tip screwdriver, install and retain- These were removed in
ed screw (10) securing heatsink assembly
step d.
(11) to audio amplifier chassis (3).
20 captive
m.
Using torque screwdriver, tighten 20
These were removed in
screws (8)
captive screws (8) securing heatsink
step b.
assembly (11) to power supply cover
(17). Torque screws to 8 to 10 in-lb.
4-194
|
