|
| |
TM 11-5820-890-30-5
4-60. REPLACEMENT OF WIRING ON AUDIO AMPLIFIER CHASSIS CONNECTORS.
Tools:
Cross tip screwdriver
Torque screwdriver
Flat tip screwdriver
Soldering kit
Expendable Supplies:
Cotton swabs
Solder
Alcohol
References:
Paragraph 4-52 for removal and installation of 1-Watt Audio Amplifier CCA (5A2).
ITEM
ACTION
REMARKS
REMOVAL
a. Mounting adapter
Set on work surface with right side
toward you.
b. Access cover (1)
Remove and retain access cover (1).
c. Wires
Remove insulation sleeving and tiedown
straps as required. Using soldering kit,
tag, desolder, and remove defective
wire(s) from audio amplifier chassis
connectors J2 through J6 and J9.
See figure 4-14. Refer to
paragraph 4-52 for access
cover removal procedures.
4-169
|
