|
| |
TM 11-5820-890-30-5
4-36. REPLACEMENT OF SIDE PANEL.
Tools:
Cross tip screwdriver
Torque screwdriver
Flat tip screwdriver
Adjustable wrench
1/2-inch open-end wrench
References:
Figures 4-5, 4-10, and 4-11 for location of amplifier adapter parts.
Paragraph 4-40 for removal and installation of bottom cover.
ITEM
ACTION
REMARKS
REMOVAL
a. Mounting adapter
b. Six captive screws (13)
and rear access cover
(12)
c. Two screws (1) and flat
washers (2)
d. Bottom cover (13)
e. Connector P1 (13)
f. Four screws (40)
g. Two screws (5)
h. Five screws (7 and 8)
i.
Mounting rail (9)
j.
Side panel (8)
Set on work surface with left side
toward you.
Using flat tip screwdriver, fully loosen six
captive screws (13) securing rear access
cover (12) to power control chassis (10).
Remove and retain rear access cover.
Using cross tip screwdriver, remove and
retain two screws (1) and flat washers
(2) securing bottom shelf (3) to power
control chassis (4).
Remove and retain.
Using flat tip screwdriver, remove and
retain four screws securing connector P1
to power supply chassis (15).
Using cross tip screwdriver, remove and
retain four screws (40) securing rear of
power control chassis (4) to power supply
chassis (15).
Using cross tip screwdriver, remove and
retain two screws (5) securing side panel
(6) of power control chassis (4) to power
supply chassis (15).
Using cross tip screwdriver, remove and
retain five screws (7 and 8) securing top
shelf (9) to mounting rail (10) on side
panel (6) of power control chassis (4).
Using cross tip screwdriver, remove and
retain seven screws (37) securing mount-
ing rail (9) to defective side panel (8).
Remove and retain mounting rail (9).
Using cross tip screwdriver, remove and
retain four screws (36) securing defective
side panel to power control chassis (17).
Remove defective side panel.
See figure 4-5.
See figure 4-11.
NOTE
There are two different
types of bottom shelf.
Refer to paragraph 4-40 for
removal procedures.
See figure 4-10.
See figure 4-10.
4-132
|
