|
| |
TM 11-5820-890-30-5
4-27. REPLACEMENT OF WIRING ON AUDIO AMPLIFIER CHASSIS CONNECTORS. Continued
ITEM
ACTION
REMARKS
INSTALLATION
j.
Wires
FROM
J2-B
J2-C
J2-D
J3-B
J3-C
J3-D
J4-A
J4-B
J4-C
J4-D
J4-F
J5-A
J5-B
J5-C
J5-D
J5-F
J6-A
J6-B
J6-C
J6-D
J6-E
J6-F
J9-A
J9-B
J9-C
J9-D
J9-E
J9-F
k. Connectors J2 through J6
and J9
l.
Audio amplifier CCA (6)
m. Connectors P2 and P3
(1 and 2)
n. Audio amplifier CCA (6)
Using soldering kit, install and solder
Before and after soldering,
replacement wire (s) on audio amplifier
clean wires and pins with
chassis connectors J2 through J6 and J9,
alcohol and cotton swabs.
as required, per the following wire list.
Replace insulation sleeving and tiedown
straps as required.
TO
COLOR/TRACER
P2-5
White/Blue
P2-11
White/Violet
P2-9
White/Gray
P2-6
White/Brown
P2-10
White/Red
P2-8
White/Orange
J2-A
Black
J2-B
White/Blue
J2-C
White/Violet
J2-D
White/Gray
P2-13
White
J3-A
Black
J3-B
White/Brown
J3-C
White/Red
J3-D
White/Orange
P2-12
White/Green
P2-14
Black
J5-B
White/Brown
J5-C
White/Red
J5-D
White/Orange
P2-2
White/Yellow
J5-A
Black
A1-E14
Black
A1-E4
White/Red
A1-E3
White/Black
A1-E8
White
A1-E7
White/Orange
TB1-2
Red
Install replacement connector in
Refer to paragraphs 4-21
audio amplifier chassis.
and 4-22 for installation
procedures.
Position retained audio amplifier CCA in
This was removed in
audio amplifier chassis.
step g.
Connect connectors P2 and P3 to audio
amplifier CCA connectors J2 and J1 and
tighten screws.
Hold in place in audio amplifier chassis.
4-116
|
