|
| |
TM 11-5820-890-30-5
3-39. REPLACEMENT OF CAPACITOR C1.
Tools:
Soldering kit
Long nose pliers
Expendable supplies:
Alcohol
Cotton swabs
Solder
References:
Paragraph 3-25 for removal and installation of test adapter from maintenance group lid.
Figure 3-12 for illustration of diode CR1, capacitor C1, and mounting bracket.
ITEM
ACTION
REMARKS
REMOVAL
a. Wires
Note positions of wires soldered to
See figure 3-12 (sheet 3).
capacitor C1 (85). Using soldering kit,
desolder wires from capacitor C1 (85).
b. Capacitor C1 (85)
Using Long nose pliers, remove and
discard defective capacitor C1 from
mounting hardware items 83 and 84
on mounting bracket (80).
INSTALLATION
c. Capacitor C1 (85)
Using Long nose pliers, attach replacement This was removed in
capacitor C1 in correct position on retained step b.
mounting hardware items 83 and 84 on
mounting bracket (80).
d. Wires
Using soldering kit, solder all wires to
Before and after soldering,
correct positions capacitor C1 (85).
clean solder joints with
cotton swabs and alcohol.
3-109
|
