|
| |
TM 11-5820-890-30-5
2-51. REPLACEMENT OF AUDIO FLEX ASSEMBLY. Continued
ITEM
ACTION
REMARKS
INSTALLATION Continued
s. Set screws
Use 1/16-inch hex wrench. Tighten set
screws securing knobs to VOL variable
resistor and DATA rotary switch.
t.
RT front panel assembly
Install retained RT front panel assembly.
Refer to paragraph 2-49 for
installation of RT front pan-
el assembly.
2-52. REPLACEMENT OF SWITCH FLEX ASSEMBLY.
Tools:
1/16-inch hex wrench
5/16-in socket
3/8-inch socket
1/2-inch socket
9/16-inch socket
3/4-inch spanner
Torque screwdriver
Torque wrench
Flat tip screwdriver
Socket wrench
Expendable supplies:
Silicone compound
References:
Paragraph 2-35 for removal and installation of RT covers.
socket
Paragraph 2-49 for removal and installation of RT front panel assembly.
ITEM
ACTION
REMARKS
REMOVAL
a. RT front panel
b. Set screws
assembly
Remove and retain.
Refer to paragraph 2-49 for
removal of RT front panel
assembly.
Use 1/16-inch hex wrench. Loosen set
screws securing knobs to DIM variable re-
c. Knobs
d. Spring Iockwashers
e. Retaining nuts
sister, CHAN rotary switch, MODE rotary
switch, RF PWR rotary switch, and FCTN
rotary switch.
Remove and retain knobs.
Remove and retain spring Iockwashers
from shafts of DIM variable resistor,
CHAN rotary switch, MODE rotary switch,
RF PWR rotary switch, and FCTN rotary
switch.
Use 3/8-inch socket and socket wrench.
Remove and retain retaining nuts securing
RF PWR rotary switch, CHAN rotary switch,
and MODE rotary switch to RT front panel
assembly.
2-184
|
