|
| TM
115820-890-20-3
3.2.
TROUBLESHOOTING GUIDES. Continued
TS Guide 15. RTA: LESS THAN 30W FWD PWR OUT OF PA FROM 30-40
MHZ
ACTIONS
CHECKS
STEPS
N/A
N/A
15.1
Start veh engine
Re-measure FWD PWR
NO:
FWD PWR
GO to 15.2
greater than
YES: Problem is with
30 w?
vehicle power
N/A
N/A
15.2 Remove W2 from RTA
N/A
Remove PA
N/A
Connect test set cable from
N/A
N/A
RT ANT to test set RADIO
Press PTT
N/A
N/A
Measure voltage at VAA J1,
NO:
67 Vdc?
Go to 15.3
YES: Go to 15.4
Pin N to Pin A (GND)
15.3 Remove RT
N/A
N/A
Check continuity at VAA
Open?
NO:
Replace RT
YES: Replace VAA
J1, Pin N to J8, Pin H
N/A
15.4 Press PTT
N/A
Measure voltage at VAA J1,
67 Vdc?
NO:
Go to 15.5
YES: Go to 15.6
Pin P to Pin A (GND)
15.5 Remove RT
N/A
Check continuity at VAA
Open?
J1, Pin P to J8, Pin M
15.6 Measure voltages at VAA J1:
All voltages
YES: Replace PA
Pin B
6.556.95 Vdc
NO:
correct?
Replace VAA
Pin C
12.5 -13.5 Vdc
Pin D
22.032.0 Vdc
*
Pin F
180220 Vdc
VAA J1 and PA MOUNT J4 have 200 VDC on Pin F.
WARNING:
Use extreme caution in measuring voltage.
3-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |