|
| |
TM 11-5820-890-20-2
8-20
8.3.
COMPONENT REPAIR. Continued
c.
MOUNTING BASE (MT 6576): Continued
MAINTENANCE REQUIREMENT:
ACTIONS:
(4)
Replace thumbscrew (3)
(1)
Remove connector assembly
(2)
Remove screws from top tray
(3)
Remove ground leads from top tray
(4)
Remove spring pin from thumbscrew
(5)
Remove washer from thumbscrew end
(6)
Remove thumbscrew, rim clenching clamp, and retaining ring
(7)
Install rim clenching clamp and retaining ring on good thumbscrew
(8)
Install thumbscrew in top tray
(9)
Place flat washer on thumbscrew
(10) Install spring pin in end of thumbscrew
(11) Install 4 ground leads to top tray
(12) Install screws to top tray
(13) Install connector assembly
(5)
Replace seal screw on back of
connector assembly
(1)
Remove seal screw with O-ring
(2)
Install good seal screw and O-ring
(6)
Replace connector cover (4)
(1)
Remove connector cover from retainer
(2)
Secure connector cover to retainer
|
