|
| |
TM 11-5820-890-20-2
8-11
8.2.
COMPONENT REPLACEMENT. Continued
h.
Control Monitor (C 11291) (C M):
TO REMOVE:
TO REPLACE:
(1)
Set VAA CB1 to OFF; if used, set LS 671 or VIC
CB1 to OFF
(1)
Place control montior (1) in position on
mounting plate (2)
(2)
Remove all cables from control monitor
(2)
Replace bolts (6), washers (4, 5), and nuts (3)
to secure control monitor (1) to mounting plate (2)
(3)
Remove bolts (6), washers (4, 5), and nuts (3)
securing control monitor (1) to mounting plate (2)
(3)
Connect all cables to control monitor
(4)
Remove control monitor (1) from mounting plate (2)
(4)
Set VAA CB1 to ON; if used, set LS 671 or VIC
CB1 to ON
1
2
3
4
5
5
6
|
