|
| |
TM 11-5820-890-20-2
8-5
8.2.
COMPONENT REPLACEMENT. Continued
b.
Receiver Transmitter (RT)/Remote Control Unit (RCU):
TO REMOVE:
TO REPLACE:
(1)
Set PSA CB1 to OFF; if used, turn LS 671
CB1 to OFF
(1)
Position RT/RCU in PSA
(2)
Remove handset from RT/RCU AUD/FILL or
AUD/DATA
(2)
Tighten PSA thumbscrews to secure RT/RCU
(3)
Remove CX 13314 from RT AUD/DATA, if present
(3)
Connect RF cable to RT ANT J1, if present
(4)
Remove RF cable from RT ANT J1, if present
(4)
Connect CX 13314 to RT AUD/DATA, if present
(5)
Loosen PSA thumbscrews securing RT/RCU
(5)
Connect handset to RT AUD/FILL, if CX 13314 is
present, or AUD/DATA
(6)
Pull RT/RCU straight forward to clear PSA
(6)
Set PSA CB1 to ON; if used, turn LS 671 CB1 to ON
NOTE
Remove
holding
battery
before
evacuating bad RT to Direct Support.
The battery is removed to avoid
compromise of any loaded variables.
SHORT RANGE,
AN/VRC 87C
AN/VRC 88C
CX 13314/VRC cable
used for remote keying
by either an LS 671/VRC
or AM 1780/VRC
|
