TM  11-5820-890-20-2 8-3 8.1. INSPECTION PROCEDURES.   Continued COMPONENT ITEM CHECK FOR: g. Control Monitor (Continued) Cables Complete? Correctly routed? Pins bent or missing? Cover worn or torn? Connectors damaged? h. VIC-1 / AM 1780 / C 2297 / C 2298 Case Cracked or dented? Screws missing? Bolts, washers, nuts missing? Controls Knobs missing? Set screws missing? Knobs tightly mounted on shaft? Connectors Threads damaged or stripped? Cracks or chips between contacts? Cables Complete? Correctly routed? Pins bent or missing? Cover worn or torn? Connectors damaged? DS1 Tight connection to chassis? Lens damaged or missing? Bulb burned out? i. LS 671/VRC Loudspeaker Case Cracked or dented? Screws missing? Bolts, washers, nuts missing? Controls Knobs missing? Set screws missing? Knobs tightly mounted on shaft? Connectors Threads damaged or stripped? Cracks or chips between contacts? Cables Complete? Correctly routed? Pins bent or missing? Cover worn or torn? Connectors damaged? DS1 Tight connection to chassis? Lens damaged or missing? Bulb burned out? j. Mounting Base Frame Cracked or dented? Hardware missing? Connectors Threads damaged or stripped? Cracks or chips between contacts? Protective caps Protective caps broken or missing? Chains or cords broken or missing? Thumbscrews Thumbscrews serviceable?