| |
TB 115820890202
63/(64 blank)
6.3.
ECCM FILL DEVICE (MX 18290).
a.
If fill device will not accept a fill of FH data, troubleshoot as shown below.
NO
YES
Fill Device Data Will Not Load.
VARIABLES
LOAD
NO
YES
VARIABLES
LOAD
TROUBLESHOOTING FLOWCHART.
1. REPLACE BATTERY WITH
KNOWN GOOD BATTERY.
2. LOAD A VARIABLE.
3. TRANSFER THE VARIABLE
TO A KNOWN GOOD RT.
1. REPLACE FILL DEVICE CABLE.
2. LOAD A VARIABLE.
3. TRANSFER THE VARIABLE TO A
KNOWN GOOD RT.
PROPERLY DISPOSE OF THE
REPLACED BATTERY.
REPLACED FILL DEVICE CABLE
IS BAD.
REPLACE FILL DEVICE.
START
b.
If fill device is faulty, send device to DS level maintenance for repair.
|