|
| |
TM 11-5820-890-20-2
1-15
1.8.
DESCRIPTION OF COMPONENTS. Continued
ANTENNA, MANPACK AS 3683/PRC
The Antenna, Manpack AS 3683/PRC (manpack antenna) mates with the RT ANT connector. The RT provides
for impedance matching when this antenna is installed. The flexible antenna base is used to move the radiating
element for best communication.
ANTENNA, MANPACK AS 4266A/PRC
The Antenna, Manpack AS 4266A/PRC (8 ft, 7 in manpack antenna) mates with the RT ANT connector. This
antenna contains its own matching circuitry. The antenna is composed of several sections held together with an
elastic cord running through the center and is stored in a folded position.
BATTERY BOX, CY 8523A
BINDING
POSTS
HOLDING
LATCH
HOLDING
LATCH
BINDING
POSTS
HOLDING
LATCH
HOLDING
LATCH
BATTERY BOX, CY 8523B
BATTERY BOX, CY 8523C
HOLDING
LATCH
HOLDING
LATCH
HRCRD
CONNECTION
The Battery Box CY 8523 series (battery box) holds the battery to the back of the RT or RCU. The connector on
the battery box mates with the system connector on the RT or RCU. Four latches hold the battery box in place.
The CY 8523A and CY 8523B battery box has two binding posts that are used to connect the RCU to the RT.
The CY 8523C binding post has been eliminated, CY 8523C has a special connector to allow connection of the
Hand Held Remote Control Device (HRCD). For use of a SIP RT as an RCU or remote RT, CY 8523A and
CY 8523B battery box is required.
|
