|
| |
TM 11-5820-890-20-2
1-12
1.8.
DESCRIPTION OF COMPONENTS. Continued
AMPLIFIER ADAPTER, VEHICULAR AM 7239/VRC
PA B CONTROL
CONNECTOR (J11)
J10
CONTROL MONITOR
CONNECTOR (J9)
REMOTE CONTROL
BINDING POSTS
(E1A, E2A, E1B, E2B)
The control monitor is connected to the VAA connector J9. The control monitor cable must be disconnected
from connector J9 if an RCU is to be installed. When a PA is installed to enhance RT B, then the PA mount
control cable is connected to connector J11. J10 is an unused connector. Binding posts are provided for a
remote control unit. These binding posts hold field wire which connects to another set of binding posts on an
VAA or battery box. This allows the radio and RCU to communicate with each other. A retaining bar is issued
with the VAA. It is used to prevent the loss of the RT, RCU, or PA.
|
