FREQUENCY HOPPING MULTIPLEXER (FHMUX) TASKS

TM 11-5820-890-10-8

7.4.

FREQUENCY HOPPING MULTIPLEXER (FHMUX) TASKS

DESCRIPTION

This task allows an NCS to establish radio priority strategy for up to four

radios when FHMUX is employed.

DETAILED FLOWCHART

NCS OPERATIONS WITH MULTIPLEXER

SUBTASKS

RESULTS

ACTIONS

a. SET: POWER ON

Set: POWER toggle

The POWER indicator should illuminate

continuously and the four BIT/FAULT

switch to ON.

indicators should illuminate for

approximately five seconds after

power-on and then extinguish upon

successful completion of the self test.

The POWER ON indicator should stay

illuminated.

b. SET: RADIO PRIORITY

Get: Net Priority strategy.

N/A

Set: RADIO PRIORITY to

EQUAL to give all RTs

priority.

Set: RADIO PRIORITY to

desired RT, 1A thru 2B, to

give highest priority to a

single RT

Set: RADIO PRIORITY to

RXMT 1A+1B if RT 1A

and RT 1B are in the

retransmit mode and they

are to have higher priority

than RTs 2A and 28.

7-17