HRCRD

11-5820-890-10-8

3.6a.

HRCRD

Connect the HRCRD "Y" cable ends to the RT AUD/FILL or AUD/DATA

Cabling

port and to the 6-pin connector on Battery Box CY-8523C or AUX

connector of the RT-1523E. Only Battery Box CY-8523C may be

used with the HRCRD.

To control radio functions, press [SEL] until the required function is

Controls

highlighted (CHAN; COMSEC; RF PWR; MODE). Then press the

[DOWN ARROW] until the specific item you need appears in the

display. RT FCTN switch must be in REM for HRCRD to be functional.

To turn the backlight on, press the light button. To turn the light off,

Light

press the light button a second time.

To change the level of audio volume, rotate the volume control knob on

Volume

the side of the HRCRD to reach to level desired.

For control of the other radio functions, make all the required selections

Radio Controls

and changes using the R keypad and front panel controls.

Press the Push-To-Talk (PTT) switch on the side of the HRCRD.

Transmit

Place handset near one end and adjust volume to required level for

Receive

reception.

3-13