|
| TM 11-5820-890-10-8
RT-1523A:
Control knobs are affixed with top-positioned Phillips screws,
RT cover is affixed with Phillips screws,
All three digits of net ID may be changed by operator.
RT Mode switch may remain in FH position to change net ID.
Sync time may be loaded electronically from an Automated Net
Control Device (ANCD), a Precision Lightweight GPS Receiver
(PLGR), manually via the keypad, or by ERF.
Running self-test with COMSEC in PT results in display message
of " O CT" (Changing to CT clears message.)
G
RT will accept ERF if sync time is less than 100 days different from
net sync time.
Figure 2-3. RT-1523A Features
RT-15238:
Control knobs are affixed with side-positioned Allen screws.
RT cover is affixed with slot-headed screws.
All three digits of net ID may be changed by operator.
RT Mode switch may remain in FH position to change net ID.
Sync time may be loaded electronically from an Automated Net
Control Device (ANCD), a Precision Lightweight GPS Receiver
(PLGR), manually via the keypad, or by ERF.
Running self-test with COMSEC in PT results in display message
of " O CT" (Changing to CT clears message.)
G
RT will accept ERF if sync time is less than 100 days different from
net sync time.
Figure 2-4. RT-1523B Features
2-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |