Tool and Test Equipment Requirements (Sect III)

TM 11-5820-882-23/TM 06827A-23/2

numbers in this column coincide with the numbers used

field operating conditions. This time includes prepara-

in the tools and equipment column of the MAC. The

tion time, troubleshooting time, and quality assurance/

numbers indicate the aplicable tool or test equipment

quality control time in addition to the time required to

for the maintenance functions.

perform the specific tasks identified for the maintenance

functions authorized in the maintenance allocation

b. Maintenance Category. The codes in this COl-

chart. Subcolumns of column 4 are as follows:

umn indicate the maintenance category allocated the

tool or test equipment.

C--Operator/Crew

c. Nomenclature, This column lists the noun name

O--Orangizational

and nomenclature of the tools and test equipment re-

F--Direct Support

quired to perform the maintenance functions.

H--General Support

D--Depot

d. National/NATO Stock Number. This column

lists the National/NATO stock number of the specific

e. Column 5, Tools and Equipment. Column 5

tool or test equipment.

specifies by code, those common tool sets (not in-

e. Tool Number. This column lists the manufac-

dividual tools) and special tools, test, and support

turer's part number of the tool followed by the Federal

equipment required to perform the designated function.

Supply Code for manufacturers (5-digit) in parentheses.

f. Column 6, Remarks. Column 6 contains an

alphabetic code which leads to the remark in section IV,

B-5. Remarks (See IV)

Remarks, which is pertinent to the item opposite the

a. Reference Code,

particular code.

This code refers to the ap-

propriate item in section II, column 6.

B-4. Tool and Test Equipment Require-

b. Remarks. This column provides the required

ments (Sect III)

explanatory information necessary to clarify items ap-

pearing in section II.

Tools or Equipment Reference Code. The

(Next printed page is B-3)

B-2