 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TO 31R2-2GRC171-2
TM 11-5820-815-14
NAVELEX 0967-LP-544-5010
5-33.
DC-DC CONVERTER MODULE A5.
5-27.
RECEIVER RF MODULE A3. 5-28.
5-34. REMOVAL OF MODULE. To remove module
5-28. REMOVAL OF MODULE. To remove receiver
from chassis, refer to figures 5-10 and 5-11 and proceed
rf module A3 from chassis, refer to figure 5-10 and
as follows:
proceed as follows:
a. Remove top cover.
a. Remove top cover.
b. Loosen two captive screws on AlOA2J15 and
b. Loosen six captive screws around periphery of
carefully disengage AlOA2J15 from A5P1.
module retainer bracket and remove bracket.
c. Loosen ten captive screws around periphery of
c. Disconnect receive injection cable A2P2 from
module.
A3J1 and receive rf cable A7A3P2 from A3J2.
d. Remove module from chassis.
d. Remove module by carefully sliding module to
the rear, disengaging A3A1P1 from A10OA2J12, and
5-35. REPLACEMENT OF MODULE.
lifting module from chassis.
Replace
module in the reverse order of its removal.
5-29. REPLACEMENT OF MODULE. Replace mod-
CAUTION
ule in the reverse order of its removal.
CAUTION
Ensure
proper
module-to-
chassis plug and pin alignment
is achieved before tightening
Ensure
proper
module-to-
the captive screws on the
chassis plug and pin alignment
chassis plug.
Do not exert
is achieved before sliding
abnormal force to seat plug.
module into position. Do not
exert abnormal force to seat
5-36.
VOLTAGE REGULATOR MODULE A6.
module.
5-30.
AUDIO MODULE A4.
5-37. REMOVAL OF MODULE. To remove module
from chassis, refer to figures 5-10 and 5-12 and proceed
5-31. REMOVAL OF MODULE. To remove audio
as follows:
module A4 from chassis, refer to figure 5-10 and
a. Remove top cover.
proceed as follows:
b. Loosen two captive screws on A10OA2J16 and
carefully disengage A10OA2J16 from A6P1.
a. Remove top cover.
c. Loosen ten captive screws around periphery of
b. Loosen six captive screws around periphery of
module.
module retainer bracket and remove bracket.
d. Remove module from chassis.
c. Disconnect receive rf cable A7A3P2 from A3J2.
d. Remove module by carefully sliding module to
5-38
REPLACEMENT OF MODULE.. Replace mod-
the rear, disengaging A4P1 from A10OA2J13, and lifting
module from chassis.
ule in the reverse order of its removal.
5-32. REPLACEMENT OF MODULE. Replace mod-
CAUTION
ule in the reverse order of its removal.
Ensure
proper
module-to-
CAUTION
chassis plug and pin alignment
is achieved before tightening
the captive screws on the
Ensure
proper
module-to-
chassis plug.
Do not exert
chassis plug and pin alignment
abnormal force to seat plug.
is achieved before sliding
module into position. Do not
exert abnormal force to seat
module.
5-48
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals