Maintenance code - TM-11-5820-773-24P0005

TM 11-5820-773-24P

Code

Definition

Code

Application/Explanation

H-

The lowest maintenance level capable of

level.

complete repair of the support item is the

XA-

Item is not procured or stocked because the

general support level.

requirements for the item will result in

D-

The lowest maintenance level capable of

the replacement of the next higher

complete repair of the support item is the

assembly.

depot level.

XB-

Item is not procured or stocked. If not

L-

Repair restricted to designated specialized

available through salvage, requisition.

repair activity.

XC-

Installation drawing, diagram, instruction

Z-

Nonreparable. No repair is authorized.

sheet, field service drawing, that is

B-

No repair is authorized. The item may be

identified by manufacturer's part number.

reconditioned by adjusting, lubricating,

XD-

A support item that is not stocked. When

etc., at the user level. No parts or special

required, item will be procured through

tools are procured for the maintenance of

normal supply channels.

this item.

NOTE

(3) Recoverability code. Recoverability codes are

Cannibalization or salvage may be used as a

assigned to support items to indicate the disposition action

source of supply for any items source coded

on unserviceable items. The recoverability code is entered

above except those coded XA and aircraft

in the fifth position of the Uniform SMR Code format as

support items as restricted by AR 750-1.

follows:

(2) Maintenance code. Maintenance codes are

assigned to indicate the levels of maintenance authorized

Recoverability

to USE and REPAIR support items. The maintenance

codes

Definition

Z-

Nonreparable item.

When unserviceable,

codes are entered in the third and fourth positions of the

condemn and dispose at the level

Uniform SMR Code format as follows:

indicated in position 3.

O-

Reparable item.

When uneconomically

(a) The maintenance code entered in the third

reparable, condemn and dispose at

position will indicate the lowest maintenance level

organizational level.

authorized to remove, replace, and use the support item

F-

Reparable item.

When uneconomically

The maintenance code entered in the third position will

reparable condemn and dispose at the

indicate one of the following levels of maintenance:

direct support level.

H-

Reparable item.

When uneconomically

Code

Application/Explanation

reparable, condemn and dispose at the

C-

Crew or operator maintenance performed

general support level.

within organizational maintenance.

D-

Reparable item. When beyond lower level

O-

Support item is removed, replaced, used at

repair capability, return to depot.

the organizational level.

Condemnation

and

disposal

not

F-

Support item is removed, replaced, used at

authorized below depot level.

the direct support level.

L-

Reparable item. Repair, condemnation, and

H-

Support item is removed, replaced, used at

disposal

not

authorized

below

the general support level.

depot/specialized repair activity level.

D-

Support items that are removed, replaced,

A-

Item

requires

special

handling

used at depot, mobile depot, specialized

condemnation procedures because of

repair activity only.

specific reasons (i.e., precious metal

content, high dollar value, critical

(b) The maintenance code entered in the fourth

material or hazardous material). Refer to

positions indicates whether the item is to be repaired and

appropriate

manuals/directives

for

identifies the lowest maintenance level with the capability

specific instructions.

to perform complete repair (i.e., all authorized

maintenance functions). This position will contain one of

c. National Stock Number. Indicates the National stock

the following maintenance codes:

number assigned to the item and will be used for

requisitioning purposes.

O-

The lowest maintenance level

capable of

complete repair of the support

item is the

d. Federal Supply Code for Manufacturer (FSCM).

organizational level.

The FSCM is a 5-digit numeric code listed in SB 708-

F-

The lowest maintenance level

capable of

41/42 which is used to identify the manufacturer,

complete repair of the support

item is the

direct support level.