Figure 3-8. Assembly detail, indicator light assemblies, meter panel assembly 1A15A8, typical.

TM 11-420-695-35

Figure 3-8. Assembly detail, indicator light assemblies, meter panel assembly

1A15A8, typical.

(2) Insert voltage regulator, used with

(5) Mount and secure the rear shield to

replaced connector into power supply chassis assembly

power supply chassis assembly 1A1A13 using the ten

1A1A18 and seat its connector into replacement

screws and associated washers removed in step b(l).

connector. Secure the regulator with its two captive

Removal of Lamp Sockets 1A1A13XDS1

screws.

Through 1A1A13XDS4 and 1A1A13XDS6 Through

(3) Tighten the two screws and nuts

1A1A13XDS12 (fig. L-9).

securing connector to power supply chassis assembly

(1) Turn power supply chassis assembly

1A1A18 and then remove the voltage regulator.

1A1A13 upside down and remove the 15 screws.

(4) Solder wires removed in step b(2) to

connector terminals.

3-39