|
| TM 11-5820-695-35
CHAPTER 3
DIRECT SUPPORT MAINTENANCE
Section I. GENERAL
d. Section IV contains the calibration and
3-1. Scope of Direct Support Maintenance
adjustment procedures required to maintain the
AN/GRC-144(V), AN/GRC144(V)3 and AN/GRC-
a. The direct support maintenance procedures
144(V)4 at the direct support maintenance level.
contained in this chapter supplement the organizational
maintenance procedures contained in TM 11-5820-695-
12.
Section I of this chapter identifies the test
e. Section V provides testing procedures to
equipment and materials required to perform direct
determine that repaired equipment is performing
support maintenance, and lists the periodic calibration
satisfactorily for return to users.
checks and tests that must be performed by direct
support maintenance personnel as periodic preventive
3-2. Tools, Test Equipment, and Materials Required
maintenance.
The following chart lists the test equipment, tools and
other items required to troubleshoot, test, repair and
b. Section
II
contains
direct
support
adjust all AN/GRC-144 radio sets at the direct support
troubleshooting procedures. The procedures are a
maintenance level. Refer to paragraphs 3-53.1 and 3-
continuation of those covered at organizational level to
69c for fabricated tools used to repair and adjust
a higher maintenance level.
Converter-Multiplier CV-3633/GRC-144(V) at the direct
support level.
c. Section III contains repair procedures for
connectors with replaceable contacts or coaxial inserts;
and removal and replacement procedures for piece
parts and nonrepairable assemblies.
Item
National stock No.
References
Socket, Wrench, DHEX 12 PT, 1/4-
5120-00235-5869................................ ...............
inch
Hand Ratchet, Socket Wrench , T
5120-00-221-7966................................ ..............
SIiding
Attachment, Bar Extension Solid..................
5120-00-243-7325................................ ..............
Tool Kit, Electron c Equipment .....................
5180-00-605-0079................................ .............. SC 5180-9-CL-S21
TK-100/G
Tool Kit, Electronic Equipment
5180-00-610-8177................................ .............. SC 5180-91-CL-R07
TK-105/G
Meter Calibration Facilities Kit
6625-00-133-7863................................ ..............
MW-1207/GRC
Counter Electronic, Digital Readout
6625-00-911-6368................................ ..............
HP 5340A
Multimeter TS-352B/U................................ .
6625-00-242-5203................................ .............. TM 11-6625-366-15
Test Set, Radio Frequency Power
6625-00-892-5541................................ .............. TM 11-6625-498-12
AN/USM-161
Oscilloscope OS-261/V ...............................
6625-00-053-3112................................ ..............
Signal Generator AN/uRM-528B .................
6625-00-965-1501................................ .............. TM 11-6625-214-10
Test Set, Electrical Meter TS-656/U .............
6625-00-806-4485................................ .............. TM 11-6625-226-12
Crimping Tool MS 3191-4 with Head
5120-00-856-3732................................ ..............
Assembly W1
Change 6 3-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |