|
| TM 11-5820-670-30
2-84. UNITS FREQUENCY SELECTOR SWITCH S9102 REPLACEMENT. (CONT)
INSTALLATION (CONT)
EL1AT139
5. Position switch locating tab in hole in panel (1) and install IT Iockwasher (2) and nut (3) and,
using wrench, tighten nut (3).
6. Position cam (4) on switch stem (5) as shown in illustration and install roll pin (6).
7. Position cam stop guide (7) with larger area of guide toward top and install cam stop (8), re-
taining plate (9), and two screws (10).
8. Using screwdriver, tighten screws (10).
FOLLOW-ON MAINTENANCE: Install switch and wiring assembly (para 2-77).
2-250
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |