UNITS FREQUENCY SELECTOR SWITCH S9102 REPLACEMENT-continued

TM 11-5820-670-30

2-84. UNITS FREQUENCY SELECTOR SWITCH S9102 REPLACEMENT. (CONT)

EL1AT086

NOTE

View from rear of switch. Position switch locating tab as shown in illustrations. Tag all

wires with index numbers for location and description.

1. Using screwdriver, remove two screws (1), retaining plate (2), cam stop (3), and cam stop

guide (4).

2. Remove roll pin (5) from cam (6) and slide cam off switch stem (7).

3. Using wrench, remove nut (8) and IT Iockwashers (9) and carefully push switch (10) away from

panel (11).

4. Starting from wafer H, unsolder wires as shown in illustrations through wafer D.

2-245