|
| TM 11-5820-670-30
2-83. TENS FREQUENCY SELECTOR SWITCH S9101 REPLACEMENT. (CONT)
INSTALLATION
1. Position switch (1) in panel (2) with switch locating tab in line with hole in panel.
NOTE
View from rear of switch. Position switch locating tab as shown in illustration. See FO-21
for complete wiring diagram.
2. Starting from wafer A and using tags for reference, solder wires as shown in illustrations.
3. Position switch locating tab in hole in panel (2) and install IT Iockwasher (3) and nut (4) and,
using wrench, tighten nut (4).
4. Position cam (5) on switch stem (6) as shown in illustration and install roll pin (7).
5. Position cam stop guide (8) with larger area of guide toward top and install cam stop (9), re-
taining plate (10), and two screws (11).
6. Using screwdriver, tighten screws (11).
FOLLOW-ON MAINTENANCE: Install switch and wiring assembly (para 2-77).
2-243
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |