INSTALLATION - TM-11-5820-670-300307

TM 11-5820-670-30

2-68. A1000 ASSEMBLY REPLACEMENT. (CONT)

REMOVAL

1. Using wrench, loosen three captive nuts (1).

2. Remove A1000 assembly (2).

INSTALLATION

1. Turn dial (3) counterclockwise to position .00 setting as shown in view A.

2. Turn coupler (4) counterclockwise to stop (5) (view B).

3. Turn coupler (4) clockwise to position shown in view C.

4. Check pointer (6) on assembly which indicates band position of gearbox (7) (view D).

5. Move linkage arm (8) to band A or band B position as indicated by pointer (6).

6. Position A1000 assembly (2) on captive nut towers and aline couplers (4 and 9), and linkage

arm (8) and band switch cam (10).

NOTE

Coupler (4) may have to be turned slightly to mate with coupler (9).

7. Using wrench, tighten three captive nuts (1).

FOLLOW-ON MAINTENANCE: Install A1000, A2000, A6000, and A9700 assembly (para 2-67).

2-215