|
| TM 11-5820-670-30
2-67. A1000, A2000, A6000, AND A9700 ASSEMBLY REPLACEMENT. (CONT)
15. Using screwdriver, loosen two screws (11) on wire clips (12) and remove brown wire (P6002)
16. Using screwdriver, remove one screw (13), one screw (14), and Iockwasher (15).
17. Using screwdriver, remove two screws (16) and bracket (17).
18. Using screwdriver, remove two screws (18).
19. Using screwdriver, remove three screws (19) and Iockwashers (20).
20. Remove A1000 assembly bracket (21).
21. Carefully raise assembly off chassis and remove.
INSTALLATION
NOTE
Before installing assembly, ensure seven color-coded wire plugs are pushed under
chassis.
Before installing assembly, ensure green wire (P1004), violet wire (P1003), and brown
wire (P6002) are hanging outside of chassis.
1.
Position assembly in chassis and install two screws (18).
2.
Position bracket (17) on front panel and gearbox and install two screws (16), one screw (13),
one screw (14), and Iockwasher (15).
3.
Using screwdriver, tighten screws (13, 14,16, and 18).
4.
Position A1000 assembly bracket (21) on A1000 assembly (10) and install three screws (19)
and Iockwashers (20).
5.
Using screwdriver, tighten three screws (19).
6.
Connect green wire (P1004) (8) to J1004 (9) and violet wire (P1003) (6) to J1003 (7) on
A1000 assembly (10).
7.
Connect yellow wire (P6003) (3) to J6003 (4) and brown wire (P6002) (1) to J6002 (2) on
A6000 assembly (5).
8.
Using screwdriver, loosen two screws (11) on wire clips (12) and install browon wire (P6002)
(1) in wire clips (12).
9.
Using screwdriver, tighten two screws (11).
2-211
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |