|
| TM 11-5820-670-30
2-54. SQ DIS SWITCH S9602 AND XMTR TEST SWITCH S9603 REPLACEMENT. (CONT)
INSTALLATION
1.
Position switch (10) in front panel (11) and install nut (9).
2.
Using socket wrench, tighten nut (9).
CAUTION
When performing steps 3 and 4, use extreme care to prevent damaging switches.
Due to close proximity of switch terminals, use extreme care not to flow solder across
switch terminals.
NOTE
For XMTR TEST switch, do step 3. Note wire color of item 7.
For SQ DIS switch, do step 4. Note wire color of item 7.
3.
4.
Position front panel (11) on chassis and install two screws (1), two screws (2), flat washers
5.
(3), and nuts (4).
6. Using screwdriver and wrench, tighten screws (1 and 2) and nuts (4).
7. Install TEST SWITCH knob (6) on switch.
8. Using hex wrench, tighten setscrew (5).
FOLLOW-ON MAINTENANCE: Install A8700 assembly (para 2-45).
2-191
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |