|
| TM 11-5820-670-30
2-51. FRONT PANEL REPLACEMENT.
MATERIALS/PARTS: Panel, front
PRELIMINARY PROCEDURE: Remove TEST METER, M9601 (para 2-53).
Remove SQ DIS switch S9602 and XMTR TEST switch S9603
REMOVAL
1. Using hex wrench, loosen setscrew (1) and remove TEST SWITCH knob (2).
2. Using wrench, remove two screw fasteners (3), Iockwashers (4), and flat washers (5), and
move J4801 (6) out of way.
3. Remove front paneI (7).
INSTALLATION
1. Position front panel (7) near chassis.
2. Position J4801 (6) on standoffs and install two screw fasteners (3), Iockwashers (4), and flat
washers (5).
3. Using wrench, tighten two screw fasteners (3).
4. Install TEST SWITCH knob (2) and, using hex wrench, tighten setscrew (1).
FOLLOW-ON MAINTENANCE: Install SQ DIS switch, S9602 and XMTR TEST switch, S9603
2-185
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |