 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  TM 11-5820-670-30
2-49. A4500 ASSEMBLY REPLACEMENT. (CONT)
REMOVAL
1. Disconnect white wire (P1001) (1) from J1001, violet wire (P1003) (2) from J1003, and green
wire (P1004) (3) from J1004 on A1000 assembly (4).
2. Disconnect orange wire (P4505) (5) from J4505 (6), violet wire (P4503) (7) from J4503 (8),
and brown wire (9) from J4502 (10), on A4500 assembly (11).
3. Remove C-clip (12) from hinge pin (13).
4. Using screwdriver, loosen two captive screws (14) and lower A4500 assembly (11).
NOTE
When performing next step, slide hinge pin back only enough to allow removal of A4500
assembly from hinge.
5. Slide hinge pin back and remove A4500 assembly from hinge.
NOTE
Push hinge pin back into position to prevent it from falling out.
6. Disconnect white wire (P6502) (15) from J6502 (16).
7. Using screwdriver, loosen two captive screws (17) and unplug P4501 (18) from J4501 (19).
8. Remove A4500 assembly (11).
INSTALLATION
1.
Position A4500 assembly (11) near hinge and plug P4501 (18) into J4501 (19).
2.
Using screwdriver, tighten two captive screws (17).
3.
Connect white wire (P6502) (15) to J6502 (16).
4.
Slide hinge pin (13) back just enough to allow installation of A4500 assembly (11).
5.
Install A4500 assembly (11) in hinge and slide hinge pin (13) into place.
Install C-clip (12) and raise A4500 assembly (11) into position.
6.
Using screwdriver, tighten two captive screws (14).
7.
8.
Connect brown wire (9) to J4502 (10), violet wire (P4503) (7) to J4503 (8), and orange wire
(P4505) (5) to J4505 (6) on A4500 assembly.
9.
Connect green wire (P1004) (3) to J1004, violet wire (P1003) (2) to J1003, and white wire
(P1001) (1) to J1001 on A1000 assembly (4).
FOLLOW-ON MAINTENANCE: Install case (para 2-39).
2-183
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals