A9500 ASSEMBLY REPLACEMENT.

TM 11-5820-670-30

2-42. A9500 ASSEMBLY REPLACEMENT.

MATERIALS/PARTS: Power supply assembly A9500 (P/N SME619765)

PRELIMINARY PROCEDURE: Remove case (para 2-39).

REMOVAL

1. Using screwdriver, remove three shouldered screws (1) and swing open assembly (2).

2. Using screwdriver, loosen two captive screws (3) and pull P9501 (4) free from J9501 (5).

3. Remove C-clip (6) from hinge pin (7).

4. Remove hinge pin (7) from hinge (8) and remove assembly (2).

INSTALLATION

1. Position assembly (2) in hinge (8) and install hinge pin (7).

2. Install C-clip (6) on hinge pin (7).

3. Position P9501 (4) on J9501 (5) and push into place.

4. Using screwdriver, tighten two captive screws (3).

5. Close assembly (2) and install three shouldered screws (1).

6. Using screwdriver, tighten three shouldered screws (1).

FOLLOW-ON MAINTENANCE: Install case (para 2-39).

2-159