of issue that will satisfy the required units of measure
will be requisitioned.
F-- The lowest maintenance level capable of complete
h. Quantity Incorporated in Unit. Indicates the
repair of the support item is the direct support
quantity of the item used in the breakout shown on the
illustration figure, which is prepared for a functional
Z-- Nonrepairable. No repair is authorized.
group, subfunctional group, or an assembly.
4. Special Information
(3) Recoverability code. Recoverability codes are
assigned to support items to indicate the disposition
a. Detailed assembly instructions for items source
action on unserviceable items. The recoverability code is
coded to be assembled are found in TM 11-5820-530-15.
entered in the fifth position of the Uniform SMR Code
Assembly components are listed immediately following
format as follows:
the item to be assembled.
b. The following publications pertain to the
6118/FRC-93 and its components:
Z-- Nonreparable item When unserviceable, condemn
and dispose at the level indicated in position 8.
TM 11-5820-530-15, Controls, Radio Set C -6118/
F-- Reparable item. When uneconomically reparable,
FRC-93 and C-7515/FRC-93
condemn and dispose at the direct support level.
TM 11-5820-554-12, Radio Set AN/FRC-93
D-- Reparable item. When beyond lower level repair
TM 11-5820-554-20P-2 Control, Radio Set C6118/FR-
capability, return to depot. Condemnation and
disposal not authorized below depot level.
5. How to Locate Repair Parts
c. National Stock Number. Indicates the National
a. When National stock number or part number is
stock number assigned to the item and will be used for
(1) First. Using the table of contents, determine
d. Part Number. Indicates the primary number used
the functional group within which the item belongs This
by the manufacturer (individual, company, firm,
is' necessary since illustrations are prepared for
corporation, or Government activity), which controls the
functional groups and listing are divided into the same
design and characteristics of the item by means of its
engineering: drawings, specifications, standards, and
(2) Second. Find the illustration covering the
inspection requirements: to identify an item or range of
functional group to which the item belongs.
(3) Third Identify the item on the illustration and
note the illustration figure and item number of the item.
(4) Fourth. Using the Repair Parts Listing, find
When a stock numbered item is
the figure and item number noted on the illustration.
requisitioned, the repair part received
b. When National stock number or part number is
may have a different part number than
the part being replaced.
(1) First. Using the Index of National Stock
e. Federal Supply Code for Manufacturer (FSCM).
Numbers 'and Part Numbers, find the pertinent National
The FSCM is a 5-Digit numeric code listed in SB 708
stock number or part number. This index is in NIIN
42 which is used to identify the manufacturer,
sequence followed by a list of part numbers in
distributor, or Government agency, etc..
alphameric sequence, cross-referenced to the illustration
f. Description. Indicates the Federal item name and,
figure number and item number.
if required, a minimum description to identify the item.
(2) Second. After finding the figure and item
g. Unit of Measure (D/M). Indicates the standard of
number, locate the figure end 'item number in the repair
the basic quantity of the listed item as used in
performing the actual maintenance function. This
measure is expressed by a two-character alphabetical
abbreviation (e.g., ea; in, pr, etc). When the unit of
measure differs from the unit of issue, the lowest unit