Special Information - TM-11-5820-554-20P-20004

TM 11-5820-554-34P-2

of issue that will satisfy the required units of measure

Code

Application/Explanation

will be requisitioned.

F-- The lowest maintenance level capable of complete

h. Quantity Incorporated in Unit. Indicates the

repair of the support item is the direct support

quantity of the item used in the breakout shown on the

level.

illustration figure, which is prepared for a functional

Z-- Nonrepairable. No repair is authorized.

group, subfunctional group, or an assembly.

4. Special Information

(3) Recoverability code. Recoverability codes are

assigned to support items to indicate the disposition

a. Detailed assembly instructions for items source

action on unserviceable items. The recoverability code is

coded to be assembled are found in TM 11-5820-530-15.

entered in the fifth position of the Uniform SMR Code

Assembly components are listed immediately following

format as follows:

the item to be assembled.

Recoverability

b. The following publications pertain to the

codes

Definition

6118/FRC-93 and its components:

Z-- Nonreparable item When unserviceable, condemn

and dispose at the level indicated in position 8.

TM 11-5820-530-15, Controls, Radio Set C -6118/

F-- Reparable item. When uneconomically reparable,

FRC-93 and C-7515/FRC-93

condemn and dispose at the direct support level.

TM 11-5820-554-12, Radio Set AN/FRC-93

D-- Reparable item. When beyond lower level repair

TM 11-5820-554-20P-2 Control, Radio Set C6118/FR-

capability, return to depot. Condemnation and

93.

disposal not authorized below depot level.

5. How to Locate Repair Parts

c. National Stock Number. Indicates the National

a. When National stock number or part number is

stock number assigned to the item and will be used for

unknown.

requisitioning purposes.

(1) First. Using the table of contents, determine

d. Part Number. Indicates the primary number used

the functional group within which the item belongs This

by the manufacturer (individual, company, firm,

is' necessary since illustrations are prepared for

corporation, or Government activity), which controls the

functional groups and listing are divided into the same

design and characteristics of the item by means of its

groups

engineering: drawings, specifications, standards, and

(2) Second. Find the illustration covering the

inspection requirements: to identify an item or range of

functional group to which the item belongs.

items

(3) Third Identify the item on the illustration and

note the illustration figure and item number of the item.

NOTE

(4) Fourth. Using the Repair Parts Listing, find

When a stock numbered item is

the figure and item number noted on the illustration.

requisitioned, the repair part received

b. When National stock number or part number is

may have a different part number than

known.

the part being replaced.

(1) First. Using the Index of National Stock

e. Federal Supply Code for Manufacturer (FSCM).

Numbers 'and Part Numbers, find the pertinent National

The FSCM is a 5-Digit numeric code listed in SB 708

stock number or part number. This index is in NIIN

42 which is used to identify the manufacturer,

sequence followed by a list of part numbers in

distributor, or Government agency, etc..

alphameric sequence, cross-referenced to the illustration

f. Description. Indicates the Federal item name and,

figure number and item number.

if required, a minimum description to identify the item.

(2) Second. After finding the figure and item

g. Unit of Measure (D/M). Indicates the standard of

number, locate the figure end 'item number in the repair

the basic quantity of the listed item as used in

parts list.

performing the actual maintenance function. This

6. Abbreviations

measure is expressed by a two-character alphabetical

abbreviation (e.g., ea; in, pr, etc). When the unit of

Not applicable.

measure differs from the unit of issue, the lowest unit