Section III. OPERATION - TM-11-5820-554-120082

TM 11-5820-554-12 1

ELOD0055

Figure 11-3. Fixed or mobile station interconnections.

Section III. OPERATION

transfer relay in the Collins 30l-1 connects the

antenna to the exciter.)

11-10. Operation in Amateur Bands

b. Be sure the ON-OFF switch in the Collins

30l-1 is in the OFF position (fig. 11-4).

Table 11-2 shows normal full-scale meter readings if

c. Tune and load the Collins KWM-2/2A into

the exciter is a Collins KWM-2/2A. Set the exciter

the antenna. If the antenna does not present a nearly

BIAS ADJUST to produce an idling plate current of

50-ohm resistive load, the exciter can be tuned and

50 ma. Tune and load according to instructions in

loaded into a 50-ohm dummy load such as the DA-

75/W. When switched to the input of the Col

a. Connect the antenna for the band in use to

the RF OUTPUT jack on the Collins 30l-1. (When

the ON-OFF switch is in the OFF position, the

11-5