|
| TM 11-5820-401-34-3/0967-LP-432-3060
APPENDIX C
MANUFACTURED/FABRICATED ITEMS
C-1. INTRODUCTION.
This appendix includes instructions for making items authorized to be manufactured or fabricated at
the direct support level.
C-2. FABRICATED SMC TO BNC CABLE.
A fabricated SMC connector to BNC male connector is required to perform the troubleshooting in
chapter 4, section II, charts 4-x and 4-x. It is used to connect the AN/GRM-114A to various SMC .jacks
on the R-442(*)/VRC.
Parts needed:
BNC Connector UG-88 C/U
Cable RG174 C/U
SMC Connector, Female, Slip-On
Connect parts as shown in the following diagram.
C-1/(C-2 blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |