INSTALLATION-continued - TM-11-5820-401-34-30513

11-5820-401-34-3/0967-LP-432

6-6. A2000 ASSEMBLY CIRCUIT BOARD Y2200 AND Y2100 REPLACEMENT. (CONT)

CAUTION

Care must be taken when performing next two steps to prevent damage to circuit board.

When soldering a circuit board wire that leads to a crystal, clamp crystal terminal

connection with heat sink pliers (see detail A) to prevent heat transfer during soldering

operation.

7. Using soldering iron, carefully solder green wire (11) to pin (12), and green wire (13) and

clear wire (14) to pin (15).

CAUTION

Make sure all wires are routed as shown in illustration to prevent pinching when covers

are installed.

6-19