FRONT PANEL GEAR TRAIN ASSEMBLY MP101 REPLACEMENT-continued

TM 11-5820-401-34-3/0967-LP-432-3060

6-3. FRONT PANEL GEAR TRAIN ASSEMBLY MP101 REPLACEMENT. (CONT)

CAUTION

Note locations of three different length screws used to secure gear train assembly.

6. Using screwdriver, remove one 1/2-inch-Iong screw (12), one 3/8-inch-long screw (13),

and two 15/16-inch-long screws (14).

CAUTION

Position front panel face up to prevent parts within gear train assembly from falling out

when removed from front panel.

7. While holding gear train assembly (15) from bottom, push down on three knob stems (16)

while removing from front panel (17).

CAUTION

Do not turn gear train assembly upside down when removed to prevent parts from falling

out.

Note number of shims, if any, used on knob stems.

Do not turn any gear train couplers or dials.

6-3